A new milestone for the Universal Chip Analyzer (U.C.A.) : it now supports Intel 8080s, one of the very early CPU released by Intel in 1974! I originally planned to create a complete UCAS (UCA Shield) to support the 8080, but I was finally able to design a small UCA Adapter for the iAPX86 UCAS.
This is the first “active” UCA adapter (both the adapters for Zilog Z80 & Signetics 2650 are only passive). The biggest issue with the 8080 was the power requirements : unlike all CPU supported so far by the UCA, the 8080 doesn’t work with a single +5V supply rail. It also needs +12V & -5v. +12V has been created from +5V with a TI DC-DC Boost Converter and -5V is generated using a charge-pump IC. 
Some signals like the two-phase clock are also not TTL compatibles and requires a true MOS voltage swing (0-12V). For the first alpha prototype, I tried some high-speed transistors as voltage translators, but I wasn’t able to meet the tight rise/fall time (~25 ns) expected by the 8080. I then tried a Dual MOSFET driver and it worked perfectly. All components are packed on a tiny adapter the size of the previous passive ones.
Testing frequency can be set at 2.0/2.6/3.1 or 4 MHz
|
|
|
The expected “retail” price for the 8080 UCAS Adapter is ~$25.
Stay tuned for the next big announcement!